Transparent film packaging machine packaging manufacturers need to pay attention to the maintenance
Transparent film packaging machine packaging manufacturers need to pay attention to the maintenance
Each time when the system is run automatically in the default mode will automatically detect and confirm whether all cylinders in the reset state, the system will alarm, if not in the reset state, while all cylinders reset; When the system from automatically when the running state is switched to manual operation state or two-state switching over all the cylinders will be automatically reset (i.e. knuckle, push material, plastic, easy-pull, the upper flap and lower flap, cutting, blowing, are reset to the initial state ); air pressure in a normal state, when the pressure is low, the system will prompt information to inform the user insufficient air pressure, the system will not start; entire system provides two emergency switch, once the emergency, press the emergency stop button all stop, all operations are prohibited until the fault is removed, the recovery after the emergency stop button, will perform all operations.
If you want to make it more perfect, you can regularly check equipment, preferably once a month to keep indoors clean, do not let the atmosphere containing acids and other corrosive gases which flow when found it be damaged at any time repair, do not make the transparent film packaging machine working again, we need to keep the machine clean, coated with oil to prevent rust, use good Buzhao.
